• LGT270 Trailer Mounted Coiled Tubing Unit
  • LGT270 Trailer Mounted Coiled Tubing Unit
  • LGT270 Trailer Mounted Coiled Tubing Unit
  • LGT270 Trailer Mounted Coiled Tubing Unit
  • LGT270 Trailer Mounted Coiled Tubing Unit
  • LGT270 Trailer Mounted Coiled Tubing Unit

LGT270 Trailer Mounted Coiled Tubing Unit

Model LGT270

Injector continuous lifting capacity 60,000 lb (27 t)

Pump drive Stiebel

Trailer four-axle low frame trailer

Reel LGGT120-72-72

Reel Capacity 1.75" (44.5 mm)-13,120 ft (4000 m)


LGT270 trailer mounted coiled tubing unit is a specially designed and manufactured equipment with consideration of domestic distribution of oil and gas wells,well depth, pressure etc.. 

According to the different customer needs, we offer several customized designs. LGT270 trailer mounted coiled tubing unit consists of three-axle low frame trailer, National Crane 649E2, power pack assembly, control cabin assembly, tubing reel assembly, hose reel, injector assembly and accessories assembly. 

According to different operation requirements, The trailer mounted coiled tubing unit can be applied on land or ocean platform.

Injector continuous lifting capacity
60,000 lb (27 t)
Maximum working pressure of high pressure manifold
10,000 psi (69 MPa)
Maximum working pressure of stripper
10,000 psi (69 MPa)
Maximum working pressure of BOP
10,000 psi (69 MPa) 
Coiled tubing

1.5" (38 mm)-16,000 ft (5,000 m);

1.75" (44.5 mm)-13,120 ft (4,000 m)

Working temperature
-40~+113 ℉ (-40~+45 ℃)
Working conditon
Land and ocean environment


  • High reliability of jereh equipment:The whole unit is designed according to scientific calculation. The structure of each assembly is scientifically calculated to ensure that unit is more reasonable and reliable.

  • The operation range: The trailer mounted coiled tubing unit can be applied on land or ocean platform. The equipment can also be working in explosion-proof condition. 

  • Being the biggest manufacturer in china, Jereh has 10 years experience in designing and manufacturing coiled tubing unit. According to the different customer needs , Jereh can offer several customized designs for selection.

  • The whole set of special down-hole tools are self-developed by Jereh, and Jereh can provide whole series of supporting well control equipment.

  • Jereh has a fighting and enterprising after-sales service team, wholeheartedly maintaining Jereh’s equipment.

  • With humanization design Jereh equipment is easily operated.

Pump drive
three-axle low frame trailer
National Crane 649E2(maximum lifting capacity is 18t)
Control cabin
90×71×87 in (2,290×1,800×2,200 mm)
Reel LGGT120-72-72

1.Description of the power-pack

The model of deck engine is 6063HV39, which supplies power for the whole unit. The pump drive is selected according to the need of power and rotation speed of injector pump, coiled tubing reel pump, and auxiliary pump. The power pack is designed scientifically and compactly to make sure that the equipment is maintained easily when needed.

1.1description of engine

The rated power is 391 kW (525 hp), maximum torque is 391 kW (525 hp), maximum rotate speed is 2,100 rpm, water-cooling, supercharged, ataac, fifth generation computer, 24V50MT electric start,24V70A generator.

Cooling Method
Rated Power
391 kW (525 hp)
Rated Rotary Speed
2,100 rpm
Throttle Control
Electrical control
Shutdown Method

Electrical control

Air Intake
Air Filter
Air Exhaust
Muffler+ Rain Cap

24 V/70A

Starting Method
Electrical start
Equipped with the engine

1.2 description of pump drive

The Input power is 530 kW (710 hp),single pump power is 280 kW (375 hp),maximum torque of single pump is 1,500 Nm,maximum input rotate speed is 3,000 rpm,Approximate weight is 440 lb (200 kg),transmission ratio is 1:1.0351

Max. Input Power
700 kW (952 hp)
Max. Power
280 kW (single port)
Max. Input Speed
2,800 rpm

Three-port Output


The tubing reel is different according to the different working condition of each well. The main information concerned includes external diameter of tubing, the length of tubing, working pressure, tubing reel driving mode and whether introducing cables through the tubing etc..

3.Control cabin

The control cabin adopts hydraulic lifting cylinders to elevate the cabin for wide and clear vision of operators. The lifting cylinder stroke is 27 in (900 mm).. when the cabin is lifted, it can be locked reliably by a mechanical device, which is a humanization design and operated easily.
The cabin provides operators and customers with comfortable and safe working environment. The air-conditioner is installed to ensure the proper ambient temperature for the unit. 

4. Injector

The injector assembly consists of the injector, frame, BOP, stripper and lubricator etc.. Well control equipment can be provided according to customers’ requirements. Jereh has the ability with related certificates to independently develop well control equipment, at the same time, Jereh Machining and Manufacturing Co. can manufacture whole sets of well control equipment.

The injector assembly meets DNV certificates, which can be used in extreme climate, wet, oceanic and desert condition. The gripper of injector is processed by a special process. It is very wear-resisting. The replaceable gripper can be used to fit different size of tubing from 1 inch to 3.5 inch (25.4-89 mm).

5.Hydraulic and Electric System

The hydraulic system and electric system are designed precisely and well functional positioned, which have experienced real working condition for more than ten years. The hydraulic system and electric system are very reliable and guarantee the equipment in a good working condition.

6.Well Control Equipment

The well control equipment provides a safe working condition. There are different size of BOP, stripper and  lubricatorsuch as 3.06, 4.06 and 5.12, which are used for different size of tube. According to the wellhead pressure, we provide 10000 psi (69 MPa) or 15000 psi (100 MPa) well control equipment. The equipment is made by high quality of material and capable of ensuring working safety.

Whole series of self-developed and patented well controll equipment is certified by API Q1&6A. The corrosion protection material is as per NACE MR-0175 standard. The equipment is connected by union to improve installation efficiency. The hydraulic system satisfy the condition that the traction pressure drop of gripper is no more than 200 psi (1.38 MPa) after engine shutdown 8 hours in the test.


Three-axle low frame trailer meets customer special needs, which is designed through the cooperation of Jereh and a specialized company. The maximum load capacity can exceed 50T based on customer needs. The special structure is proposed to satisfy the load capacity, which lays solid foundations for Jereh in developing large-scale coiled tubing unit. That makes a great contribution to exploiting the market at home and abroad.

Inquire Now

Your Recently Viewed Items and Featured Recommendations