• TDB Hydraulic Profile Control Water Plugging Pump
  • TDB Hydraulic Profile Control Water Plugging Pump
  • TDB Hydraulic Profile Control Water Plugging Pump
  • TDB Hydraulic Profile Control Water Plugging Pump

TDB Hydraulic Profile Control Water Plugging Pump

ModelI Type

Electric motor power55KW

Variable formConstant power variable

Description

TDB Hydraulic Profile Control Water Plugging Pump is the ideal injection device for water plugging, profile control and polymer, sludge injection when the second or third time extracting oil. It's especially suitable for large amount, long time and constant pressure profile control and water plugging and applicable for many kinds of plugging agents.

Features:
1.Simple structure, reliable performance, easy maintenance, and small weight.

2.Suitable for large amount, long time and constant pressure profile control and water plugging.

3.Large cross-section area of piston, long stroke, low stroke frequency, slow linear speed of piston, and low up and down frequency for suction and exhaust valve.

4.Strong self-suction ability. No need to feed the pump.

5.Low shear rate to protect the properties of plugging agents.

6.The flow rate can be varied according to the bottom pressure (inverse proportion), or manually adjusted in the case of power allowed, according to requirement of actual operating condition. This can protect the oil layer.

7.Long using life of wearing parts, low operation cost.

Main Technical Parameters

 Model

I Type

II Type

III Type

IV Type

  V Type

Electric motor power

55KW

75KW

55KW

73.5KW

 Diesel engine

45KW

Power

380V 50Hz AC Three Phase(Allowed tolerance +5%,-10%)

Variable form

Constant power variable

Manual adjusted variables

Constant power variable

Constant power variable

Max flow rate

10m3/h

13m3/h

10m3/h

13m3/h

5m3/h

Rated pressure(MPa)

25、30、35、40

25

25、30

Drift diameter of suction pipe

Φ127mm(5")

Φ76mm(3")

Drift diameter of exhaust pipe

Φ64mm(2-7/8" oil pipe box thread)

Total Weight

6t

6.5t

6t

6.8t

3t

Length * width * height (mm)

3500×2200×1500

2400×1600×1500

Installation mode

Skid-mounted

Applicable medium

All plugging agents for profile control and water plugging: :CSE-1,three-phase foam, Class-G oil well cement, sawdust , swellable particle, sludge, bentonite, polyacrylamide, elm bark powder,

cellulose,etc.

Applicable Well

Water well profile control and water plugging, oil well water plugging, polymer flooding and waste oil recycling for Injection station

Inquire Now

Your Recently Viewed Items and Featured Recommendations