• YLT100-740 Trailer Mounted Acidizing Fracturing Unit
  • YLT100-740 Trailer Mounted Acidizing Fracturing Unit
  • YLT100-740 Trailer Mounted Acidizing Fracturing Unit
  • YLT100-740 Trailer Mounted Acidizing Fracturing Unit
  • YLT100-740 Trailer Mounted Acidizing Fracturing Unit
  • YLT100-740 Trailer Mounted Acidizing Fracturing Unit

YLT100-740 Trailer Mounted Acidizing Fracturing Unit

Description

Product Brief Introduction:
JEREH YLT100-740 is a trailer mounted acidizing fracturing unit, and it consists of the trailer, engine, transmission, high /low pressure manifold, plunger pump and control cabin. This unit features reasonable layout,compact structure and simple pipeline routing, which makes it convenient for maintenance.
During operations, the DDC S60 engine drives Allison 4750 OFS transmission which then drives the triplex plunger pump to perform pumping operations. The operation of the whole unit is concentrated on the control console locating in the control cabin. The layout of the unit ensures operators can monitor all the switches, instruments and the working condition of all systems conveniently and clearly. There is a light designed near the instrument box for night operations. The unit is equipped with two protection systems to ensure the safety of both the equipment and the personnel. One of them is mechanical safety valve. When the pressure is higher than the set value, the safety valve opens to release the pressure of the plunger pump. The other one is inductive overpressure protection device. When overpressure occurs, it will force the engine to go back to idle from high speed and the transmission to neutral from gears.
This unit is applicable for onshore operations. All supplied parts are suitable for humid, storm and sand ambient environment that varies from -20~+45℃. All hydraulic pipes, pneumatic pipes and electric lines are identified with code for convenient inspection, maintenance and replacement.

Basic Parameters:

Model:

YLT100-740

Max .Theoretical Displacement:

1.88 m³/min(496 gpm)

Max.Working Pressure:

97.6 MPa(14,147 psi)

Overall Dimensions (L×W×H) :

14000×2600×4100 mm(46×8.5×13.5 ft)  

Weight:

28000 Kg(61730 lb)

Advantages:
Pull-out ladder
The operation platform uses a pull-out ladder which saves spaces, improves the equipment appearance and convenience.

Mutual-standby manifold
The low pressure manifold on two sides of this unit are interconnected, and it is available for the low pressure manifold on either side to be used as the standby of the opposite side. The fluid supply from either side can be achieved through either centrifugal pump.

Wide application range
This unit is applicable for wide range of applications such as pumping operation by working with the coiled tubing units, pressure test, well kill, well cleanout and acidizing, etc.

Humanized design
This unit is designed with a control cabin where the operation and control system of this unit is installed. The door and window of the cabin is push-pull type. The indoor seats are reversible, which saves spaces, improves the convenience and comfort of operation. 

Detailed parameters

Engine

DDC S60 630 hp
(2 Sets)

Transmission

Allison 4750 OFS
(2 Sets)

Gear Box

AT 1202
(1 Sets)

Plunger Pump

JEREH 600S
(2 Sets)

Centrifugal Pump

6×5×11(2 Sets)

Displacement Tank

2×2 m³(2×12 bbl)

Hydraulic System

Open type

Electric System

24 V

High Pressure Manifold

105 MPa(15000 psi)

Fuel Tank

1050 L(277 gal)

Hydraulic Oil Tank

576 L(152 gal)

Lube Oil Tank

2×160 L(2×42 gal)

Inquire Now

Your Recently Viewed Items and Featured Recommendations